Customize your Osburn 2000 Wood Stove W/Blower

Introducing the Osburn 2000 Wood Stove, a powerful and efficient heating solution designed to meet the needs of medium to large-sized spaces. With its exceptional performance and stylish design, this wood stove is ideal for adding warmth and charm to your living room, cabin, or even a small commercial area.

The Osburn 2000 Wood Stove boasts a recommended heating area of up to 500 - 2,100 square feet, making it perfect for generously sized rooms and open-concept living spaces. Its firebox volume of 2.4 cubic feet allows for longer burn times and convenient loading of logs up to 16 inches in length.

With a maximum heat output of 75,000 BTU/h (22 kW), the 2000 Wood Stove delivers substantial warmth to keep your space cozy throughout the coldest months. Its high overall efficiency of 77% ensures optimal fuel utilization and reduced emissions, making it an environmentally friendly choice.

Featuring a user-friendly design, the Osburn 2000 Wood Stove is equipped with a built-in ash pan for easy maintenance and cleaning. The stove's large glass viewing window provides a mesmerizing view of the flames, enhancing the ambiance of your space.

Whether you're looking to create a cozy retreat in your living room or heat a cabin in the woods, the Osburn 2000 Wood Stove offers the perfect combination of style and performance. Experience the comfort and efficiency of this exceptional wood stove and transform your space into a warm and inviting haven.

A Tax Credit is available for this product!

• Fuel type: Dry Cordwood
• Recommended heating area (sq. ft.): 500-2,100
• Firebox volume (cu. ft.): 2.4
• Maximum burn time: 8h
• Maximum heat output (dry cordwood): 75,000 BTU/h (22.0 kW)
• Overall heat output rate (min. to max): 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW)
• Average overall efficiency (EPA cribs / Douglas fir): N.A (HHV) N.A (LHV)
• Average overall efficiency (dry cordwood): 69% (HHV) 74% (LHV)
• Optimum efficiency: 77%
• Average particulate emissions rate: 1.54 g/h
• Average CO: 89.4 g/h

Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(Average overall efficiency) As measured per CSA B415.1-10 stack loss method.

(HHV) Higher Heating Value of the fuel.

(LHV) Lower Heating Value of the fuel.

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

Optimum overall efficiency at a specific burn rate (LHV).

This appliance is officially tested and certified by an independent agency.

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

                                                                                     Canada               United-States

*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Brochure Osburn 2000 Wood Stove W/Blower

Osburn Catalog